Program ConfigID for bNB 2011 platforms, (get PCID from PCID label for 20 platforms):Ĭhange only bit 3 of byte 2 after default value is displayed as below:

Follow the display menu to configure system (Part Number, Serial Number, UUID, etc.) Attach the USB hard disk to the system.ĥ. If the MPM mode is locked on 2012 platforms, escalate to 3LS to get SMC blob to unlock MPMĢ. To program any 2012 platforms, boot to windows and run wndmifit.exe.Ĩ.

*Note: When this committing process is finished, please disable the EFI Boot:į10 Setup & gt System Configuration & gt Boot Options & gt uncheck the box of ' UEFI Boot Mode ' & gt ħ. To commit/brand any 2011 platforms, the EFI Boot needs to be enabled from F10 BIOS Setup.īoot to F10 BIOS Setup & gt System Configuration & gt Boot Options & gt select ' UEFI Boot Mode ' & gt Suggest change the system boot-order to ' USB Hard Disk FIRST ' from F10 setup.Ħ. Remove Power-on password if there is any.ĥ. *** Brand11 and Brand12 folders are copied under the root directory.***Ĥ. Unzip the zipped tool file and copy all onto the root directory of USB hard disk. Make an MS DOS bootable FAT32 USB hard disk.ģ. Write down the CT number on the label below memory sticksĢ. **** This tool works for the platforms from 2007 to 2013 ****ġ. **** How to use the tool of NBDMIFIT Version 1.1E ****

Press F9 then ∻oot from EFI File, then select your USB key - & gt Brand12 - & gt Boot圆4.efi. Goes to F10 - & gt System Configuration - & gt Boot options - & gt UEFI Boot Mode - & gt Press ' Enter ' to enable EFI boot - & gt Select ' Accept ' - & gt Save and exit.ģ. Copy folder Brand12 to the root of the USB key formatted as FAT16/FAT32.Ģ. You should see the message ' Pass!!! This machine is configured 'ħ. Press F9 then ' Boot from EFI File ', then select your USB key - & gt Brand11 Press 9 and then Enter key to lock descriptor and reboot the machine.Ħ. & gt Boot圆4.efi - & gt Press enter to run startup.nshĬhose 1 to commit VPRO with AT, or 3 to commit Non-VPRO with ATĥ. & gt Press ' Enter ' to enable EFI boot - & gt Select ' Accept ' - & gt Save and exit.ģ. Goes to F10 - & gt System Configuration - & gt Boot options - & gt UEFI Boot Mode *** Your USB key should have less than 40 folders and files in the root. Copy folder Brand11 to the root of the USB key formatted as FAT32.

Zmieniam z linka na dropboxie na forumowy załącznik.ġ. HP Pavilion DV7-1010eo Invalid serial number.

Hp dmi tool efi